Popis produktu

Gigabitový ethernetový přístupový přepínač se statickým směrováním na 3. vrstvě, RIP, vysokou hustotou 10GbE uplinků a modely POE+ pro hlas, video a bezdrátové připojení. Podporuje technologii IRF, která umožňuje agregaci zařízení plug-and-play a agregaci linek mezi více zařízeními, čímž zvyšuje redundanci sítě a využití zdrojů. Obsahuje vestavěné funkce pro správu sítě pomocí Smart Management Center (SmartMC). Zahrnuje energeticky úsporné ekologické konstrukční funkce, jako je automatické přepínání nečinných portů do energeticky úsporného režimu a vypínání nepoužívaných portů.
Klíčové vlastnosti

Škálovatelnost a vysoká dostupnost
Komplexní řízení zabezpečení
Zjednodušená správa
Zvýšená kvalita služeb

Technické parametry Porty a sloty

(8) RJ-45 autosensing 10/100/1000 ports
(2) SFP fixed 1000/10000 SFP ports
(2) RJ-45 1/10GBASE-T ports

Spotřeba

15 W (maximum)

Rozměry

4.36 x 10.47 x 16 cm

Hmotnost

1.5 kg

Odkaz na stránku výrobce: https://buy.hpe.com/fi/en/networking/switches/fixed-port-l3-managed-ethernet-switches/5100-switch-products/hpe-flexnetwork-5140-ei-switch-series/hpe-flexnetwork-5140-8g-2sfp-2gt-combo-ei-switch/p/R8J42A




Environment


Operating temperature


23°F to 113°F (-5°C to 45°C)




Operating relative humidity


10% to 90%, noncondensing




Non-operating/Storage temperature


-40°F to 158°F (-40°C to 70°C)




Non-operating/Storage relative humidity


5% to 95%, noncondensing




Acoustic


Low-speed fan: 43.5 dB, High-speed fan: 52.8 dB; ISO 7779




Electrical characteristics


Frequency


50/60 Hz




Maximum heat dissipation


160/1671 BTU/hr (168.8/1762.91 kJ/hr), for AC power. For DC power min heat dissipation is 147 BTU/hr and 3037 BTU/hr max.




Voltage


100 - 240 VAC
-54 to -57 VDC




Current


10 A




Maximum power rating


478 W




Idle power


47 W




PoE power


370 W PoE+




Notes:


- Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE Power is the power supplied by the internal power supply. When supplemented with the use of an HPE RPS1600 Redundant Power System, up to 740 W of PoE+ can be supplied.
- Max current rating for DC power is 25A. AC Input power is 47W typical, and 490W max(including 370W PoE+ consumption. DC Input voltage range is -54 to -57VDC. Total DC input power is 43W typical and 890W with 800W PoE+ Power consumption. DC Input voltage range is -54VDC to -57VDC. DC Input Source is the HPE RPS1600.




Safety


UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR Subchapter J; ROHS Compliance




Emissions


FCC Part 15 Subpart B CLASS A; ICES-003 CLASS A; VCCI-CISPR 32 CLASS A; EN 55032 CLASS; AS/NZS CISPR32 CLASS A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386; GB/T 9254; YD/T 993




Immunity


Generic


EN 55024




ESD


EN300 386




Management


IMC - Intelligent Management Center; SmartMC; command-line interface; Web browser; SNMP Manager




Services


Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.







HPE FlexNetwork 5140 24G PoE+ 2SFP+ 2XGT (370W) EI Switch (JL823A )




I/O ports and slots


24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: Ports 1-24 support 10BASE-T/100BASE-TX, 1000BASE-T (full only)




2 SFP+ fixed 1000/10000 SFP+ ports




2X1/2.5/5/10G BASE-T ports




Additional ports and slots


1 RJ-45 serial console port




Physical characteristics


Dimensions


17.32(w) x 12.6(d) x 1.72(h) in (44 x 32 x 4.36 cm) (1U height)




Weight


9.92 lb (4.5 kg)




Memory and processor


512 MB SDRAM, 256 MB flash




Mounting and enclosure


Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)




Performance


IPv6 Ready Certified




1000 Mb Latency


< 5 µs




10 Gbps Latency


< 3 µs




Throughput


95 Mpps




Routing/Switching capacity


128 Gbps




Routing table size


512 entries (IPv4), 256 entries (IPv6)




MAC address table size


16384 entries




Environment


Operating temperature


23°F to 122°F (-5°C to 50°C)




Operating relative humidity


10% to 90%, noncondensing




Non-operating/Storage temperature


-40°F to 158°F (-40°C to 70°C)




Non-operating/Storage relative humidity


5% to 95%, noncondensing




Acoustic


Low-speed fan: 44.4 dB, High-speed fan: 52.8 dB; ISO 7779




Electrical characteristics


Frequency


50/60 Hz




Maximum heat dissipation


83.6/1433 BTU/hr (88.2/1511.9 kJ/hr)




Voltage


100 - 240 VAC




Current


10 A




Maximum power rating


420 W




Idle power


24.5 W




PoE power


370 W PoE+




Notes:


Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE Power is the power supplied by the internal power supply. When supplemented with the use of an HPE RPS1600 Redundant Power System, up to 740 W of PoE+ can be supplied.




Safety


UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR Subchapter J; ROHS Compliance




Emissions


FCC Part 15 Subpart CLASS A; ICES-003 CLASS A; VCCI-CISPR 32 CLASS A; EN 55032 CLASS; AS/NZS CISPR32 CLASS A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386; GB/T 9254; YD/T 993




Immunity


Generic


EN 55024




ESD


EN300 386




Management


IMC - Intelligent Management Center; SmartMC; command-line interface; Web browser; SNMP Manager.




Services


Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.




HPE FlexNetwork 5140 48G PoE+ 2SFP+ 2XGT (370W) EI Switch (JL825A )




I/O ports and slots


48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only




2 SFP+ fixed 1000/10000 SFP+ ports




2X1/2.5/5/10G BASE-T ports




Additional ports and slots


1 RJ-45 serial console port




Physical characteristics


Dimensions


17.32(w) x 12.6(d) x 1.72(h) in (44 x 32 x 4.36 cm) (1U height)




Weight


13.23 lb (6 kg)




Memory and processor


512 MB SDRAM, 256 MB flash



...

---

Našli ste v tomto popise chybu? Prosím kontakujte nás na email: info@mader.sk
Rada výrobcov si vyhradzuje právo na zmenu niektorých parametrov, či vlastností bez predchadzajúceho upozornenia.